Design

Swash plate axial variable piston pump

Rotation direction

Clockwise, counterclockwise

Pipeline connection

Main oil port: ISO standard, split flange oil port

Other oil ports: SAE straight thread oil ports with O-ring seals

Recommended installation location

The installation position is arbitrary, and the recommended position is that the control module is located on the top or side of the pump. The top is preferred. The input shaft is allowed to be installed vertically. If the input shaft is facing upwards, a housing pressure of 1 bar must be ensured during operation. The housing must always be filled with hydraulic oil. When connecting pumps, it is recommended to use the pump with the highest power as the front pump

Mounting flange

Flange127-4 (SAE C）

Main oil port: 4-bolt split flange

25.4 mm

Main oil port configuration

Same side or opposite side

Shell oil drain port

1.0625–12 (SAE O-ring oil port)

Other oil ports

SAE O-ring oil port

Principal axis

Spline, tapered shaft

Displacement

75 cm³/rev

Flow rate (at rated speed)

270 L/min

Torque at maximum displacement

1.19 N·m/bar

Moment of inertia of rotating components

0.0096 kg•m²

Weight (with control option MA)

49 kg

Minimum speed

500 rpm

Rated speed

3600 rpm

Maximum speed

3950 rpm

System pressure

Rated pressure

450 bar

Peak pressure

480 bar

Maximum pressure of low-pressure side circuit

45 bar

Low pressure side circuit minimum pressure

10 bar

Oil replenishment pressure

Minimum

18 bar

Highest

34 bar

Control pressure

Minimum ( EDC /FNR Control, angular power)

14 bar

Minimum ( NFPE Control, angular power）

22 bar

Highest

40 bar

Makeup oil pump suction pressure

Rated

0.7 bar

Minimum(During cold start)

0.2 bar

Highest

4.0 bar

Shell pressure

Rated

3.0 bar

Highest

5.0 bar

External pressure of shaft seal

Highest

0.4 bar